New Technology for Greater Capacity
Stronger than any previous retractors, the QRT 350E utilises innovative energy management designs and material technologies to deliver a groundbreaking rating of 150kg.
Floor Anchorage Options
Floor anchorages allow QRT-350 retractors to be directly mounted to the vehicle floor, seat legs or barriers.
SLIDE ‘N CLICK (SNC)
For applications that use Slide ‘N Click anchorages, QRT-360 retractor kits feature a single-bolt SNC assembly and plunger that features a full 360º rotation, eliminating anchorage alignment guesswork.
QRT-350 Features & Details
Securing Today’s Heaviest Wheelchairs
Dynamically sled tested with wheelchairs up to 150kg.
Fully Meets WC18/19
Meets load requirements of up to 60% higher during a collision as specified by RESNA & the WC18 standard. The QRT-350 is also fully compatible with newer WC19 Wheelchairs.
Stronger Than All Other Retractors
The QRT-350 utilises an innovative energy management design and new energy-absorbing steel frame to deliver the system’s full strength for maximum load capacity.
New Webbing & Teeth
QRT-350 is the only retractor to feature both high-strength 58mm webbing and 25 interlocking teeth, that combine to allow for super fine adjust self-tensioning.
Automatic Self-Tensioning & Locking
Our industry-leading self-tensioning retractors automatically take up slack to ensure wheelchair passenger is always secured. The belts continue to tighten during low-g vehicle movements, reducing the potential for dangerous excursions in the event of a collision.
Accommodates Larger Wheelchairs
QRT-350 features a smaller retractor footprint than traditional securement, allowing for better placement flexibility and accommodation of large wheelchairs and scooters.
Positive Lock Indicator for L-Track
For L-Track and L-Pocket applications, the QRT-350 boasts a re-engineered PLI for an even clearer, more precise indication that the fitting is locked in the anchorage.
J-Hook attachments make it easy to secure virtually any device, and reduces the twisting of belts.
Enlarged Foot Release
The foot release of the QRT-350 has been enlarged, making it easier to engage.
Constructed from hardened steel and coated in zinc for maximum corrosion resistance.
No mounting bracket allows QRT-350 retractors to fit under most footrests.
Eliminates confusion: no right, left, front or rear locations.
Compatible Floor Anchorages
L-Track, Slide ‘N Click
30mph / 20G Crash Tested
QRT-350 meets or exceeds the following standards and regulations:
FMVSS 209, 302, 210, 222
Regulation 107 (Bus & Coach)
QRT-350 Retractors are crash tested at 30mph (48kph), 20G, and fully comply with RESNA WC-4, Section 18, WC18, WC19, and ISO-10542-1
*Always demand up-to-date crash testing from a certified facility
Comments are closed.