Versatile Securement Track
The most widely used floor anchorage in the industry, L-Track is a length of pre-drilled track that can be installed throughout the vehicle and used to secure retractors or tie-downs to the floor and walls. The versatility of L-Track gives operators the freedom to accommodate virtually any 4-Point Securement location.
L-Track is available in 3 different profiles:
For flush-mounted installations
For surface-mounted installations
For flush or surface mounted installations
OMNI APPROVED L-Track, Slide ‘N Click and L-Pocket Anchorages can now be used with both Q’STRAINT & SURE-LOK retractors!*
Designed for agencies that require total flexibility in a mixed-brand environment, OMNI approved anchorages take the guess work out of securing your passengers. Just look for the OMNI Approved badge to know which anchorages are compatible with both Q’STRAINT and SURE-LOK systems.
*IMPORTANT: All 4 retractors in a 4-point securement must be either Q’STRAINT or SURE-LOK — never mix brands. OMNI anchorages are strictly tested and certified to be used with approved Q’STRAINT and SURE-LOK systems. Other non-approved systems should never be used with OMNI anchorages.
L-Track Features & Details
All 3 profiles of L-Track feature standard 82º countersunk holes pre-drilled every 4” (102mm). Each hole accommodates 5/16” (8mm) bolts. Special drilling patterns available, contact us for information.
All 3 profiles of L-Track are available in 100” (254cm) lengths. Special lengths available, contact us for information.
Available in multiple profiles to suit your exact needs. Flange Profile for flush mounted installations, Angled Profile for surface mounted installations, and a Regular Profile, which can be used for either flush or surface mounted installations.
All L-Track is fully OMNI Approved, certified and tested to be compatible with both Q’STRAINT and SURE-LOK tie-downs and occupant securements.
L-Track can be used on floors or walls and provides maximum flexibility to accommodate many different wheelchair positions.
L-TRACK Meets or exceeds the following standards and regulations:
Americans with Disabilities Act (ADA) –
“Accessibility Specifications for Transportation Vehicles”
Applicable NHTSA Federal Motor Vehicles Safety Standards
RESNA Vol. 4, Sec.18 Formerly SAEJ2249 – Recommended Practice –
Wheelchair Tie-down and Occupant Restraint Systems for use in Motor Vehicles
ISO 10542 – Technical Systems and Aids for Disabled or Handicapped Persons –
Wheelchair Tie-down and Occupant Restraint Systems
Canadian Standard Association (CSA) –
“Mobility Aid and Occupant Restraint (MASOR) systems”
Comments are closed.